Chisholm Trail BALE BED & DUMP BED ALL IN ONE Starting At $23,220

There is no other unit on the market like it!

Authorized Distributor for C5 Manufacturing.

The Ultimate Bale Bed – A Bale Bed and Dump Bed ALL IN ONE!

The Chisholm Trail Bale Bed is a specialty after-market steel bed manufactured to fit pickup trucks, aiding farmers and ranchers in the feeding process of livestock and the transport of large rounds of hay. The same hydraulic components operate both the arm function and the unique dump bed function, adding considerably to the versatility of the unit.

The Chisholm Trail Bale Bed is considered by many to be the ultimate bale bed because of its feature-rich design, ruggedly built components, ease of operation and competitive pricing.

STANDARD FEATURES:

Unique Dump
The Chisholm Trail Bale Bed’s unique dump feature expands your capabilities to handle hay and dump materials from the comfort of your cab. There is no other unit on the market like it. Arm lift capacity is 2,850 pounds and bed dump capacity is 6,000 pounds.

Independent Arm Action
The Chisholm Trail Bale Bed uses two squeeze cylinders rather than a phasing cylinder for better squeeze and maneuverability. You can move the arms separately or in tandem for easier bale retrieval when stacked end-to-end. This also helps loading into a ring feeder, even if you do not have a straight shot. Lift any size or shape effortlessly— round, square, wide or narrow. You can haul up to four 4’ rounds side-by-side with a dual wheel pickup. You can also squeeze a large 4’ by 8’ square bale end-to-end or from the side. The arm range on dual wheel trucks of 3’6″ to 9’6″ enables you to grab small or misshapen items as well.

Free-Float Arm System
The free-float arm system allows you to unroll hay while maintaining full contact with the ground over rough terrain. This function helps to prevent skips and thick blankets of hay, allowing even distribution of feed and reducing waste.

Locking Valve System
Our unique locking valve stops arms from creeping out when carrying hay bales. Additionally, unlike other units on the market, our design significantly limits truck frame stress.

No-Need-to-Jack Trailers
The Chisholm Trail Bale Bed makes work easier and quicker in so many ways, especially hooking up your gooseneck trailer. Just raise the bed until the jack stand is off the ground, store the jack, lower the bed, and off you go. No more cranking!

Additional Features

· Electric-over-hydraulic heavy duty 4 gpm power unit

· LED work lights that work on a switch in the cab

· Tethered hand control

· Additional set of stop/turn lights in the headache rack

· Heavy duty 2 x 4 x 3/16″ rounded bent tube headache rack with louvers for stylish good looks and the ultimate in safety

· 2-5/16″, 30,000 pound rated hitch ball with 1″ rise, recessed in the bed with door closure

· H-frame stabilizer system

· 1/8” Tread plate floor with component access doors – no door hinges! Access door for all working components under the bed including fluid fill door.

· Mud flaps

· LED running lights throughout the bed and a pair of resistors to accommodate the low voltage lights (no flashing of lights due to computer error)

· Four 3 x 20 lift cylinders

· Two 2 x 6 squeeze cylinders

· 350 Amp fuse and fuse block system

· Grab handles on each side of the headache rack

· D-ring tie down rings on each side of the bed

· Two-part urethane paint for more durability and shine

SAFETY FEATURES

· Easy access to mechanical parts through large access doors

· Safety stand 2’ x 1- ½ x 1- ½ x 11 gauge steel

· Highly visible warning and caution decals

· 350 Amp fuse and block attached to truck frame

· Heavy duty bent tube headache rack

· Heavy duty 2 5/16th 30,0000 pound rated hitch ball 1″ rise

· 23’ Tethered hand held control pendant

· Ruggedly built all steel construction

· Grab handles on either side of the headache rack

· D-ring tie downs

SIZES

The Chisholm Trail Bale Bed is available in six different sizes:

SINGLE REAR WHEEL TRUCKS PRICING $$$

37N Bale Bed With Dump - $23,220 + GST
7’ wide x 7’4” long
The 37N bed fits single wheel trucks with a very short bed. It has a 37.5” cab to axle measurement.

42N Bale Bed With Dump - $23,220 + GST
7′ wide x 7’8″ long
The 42N bed fits single wheel trucks with a short six-foot bed. It has a 42″ cab to axle measurement.

56N Bale Bed With Dump - $23,339 + GST
7′ wide x 8’10” long
The 56N bed fits single wheel trucks with a standard eight-foot bed. It has a 56″ cab to axle measurement.

60N Bale Bed With Dump - $23,545 + GST
7′ wide x 9’10” long
The 60N bed fits a true cab and chassis ton truck with single wheels and a 60″ cab to axle measurement.

DUAL REAR WHEEL TRUCKS PRICING $$$

37w Bale Bed With Dump - $23,387 + GST
8’ wide x 7’4” longThe 37w bed fits dual wheel trucks with a very short bed. It has a 37.5” cab to axle measurement.

42w Bale Bed With Dump - $23,387 + GST
8′ wide x 7’8″ long
The 42W bed fits dual wheel trucks with a short six-foot bed. It has a 42″ cab to axle measurement.

56W Bale Bed With Dump - $23,387 + GST
8′ wide x 8’10” long
The 56W bed fits a dually bed truck. It has dual wheels and a 56″ cab to axle measurement. This is often called a bed delete truck. It has a bent (dog leg) frame as opposed to a straight cab and chassis frame.

60W Bale Bed With Dump - $23,545 + GST
7’8″ wide x 9’10” long
The 60W bed fits a true cab and chassis ton truck with dual wheels and it has a 60″ cab to axle measurement. This truck comes from the factory without a bed. It has a straight frame.

84W Bale Bed With Dump - $24,676 + GST
8′ wide x 11’10” long
The 84W bed fits dual wheel trucks with 84″ cab to axle measurement.

OPTIONAL FEATURES AND ACCESSORIES

· Removable side boards

· Spinners for unrolling hay

· Under body tool boxes

· PTO provisional power unit

· Engine driven power unit

WARRANTY

C5 Manufacturing has an excellent reputation for quality and workmanship. If you feel a component has not lasted to your expectation, please contact us. These concerns will be handled on a case-by-case basis.

C5 Manufacturing warrants, to the original purchaser, products manufactured by C5 Manufacturing to be free of defects in material and craftsmanship for a period of two years from the date of purchase. There will be NO warranty if the bed is installed by an unauthorized dealer.

Optional items have specific warranties:

· Motor and pump are warranted for a period of one year

· Spinners and headache rack work lights are warranted for 60 days

· The Dew Eze and CW Mills’s pumps are warranted for 120 days

C5 Manufacturing also warrants the purchased parts to be free from defects for the period as set by the parts said manufacturer. If any part, as determined by C5 Manufacturing, is found to be defective, the labor and the part to be replaced or repaired will be borne by C5 Manufacturing.

All shipping and handling are the consumer’s responsibility. For replacement parts, please contact your dealer or the C5 Manufacturing plant in Kingman, Kansas. Warranty for replacement or repair shall not extend the original warranty period. C5 Manufacturing does not warrant against normal wear or damages caused by abuse, negligence, poor maintenance or operation beyond the rated capacities. The warranty card must be completed and returned to C5 Manufacturing within 30 days of purchase.

LOCATED: Red Deer, AB

INSTALLED AT LACOMBE, AB

FINANCING AVAILABLE OAC!

Please reply to this ad, call or text: 403-357-2725

For more bale beds, please check out

WWW.SYNERGYINDUSTRIES.CA